- DRI Machine Shop Inc.

CNC Capabilities
Bridgeport CNC heavy duty bed type vertical machining center Model VMC 760/22, 15 HP w/40-6000 RPM spindle, 22 station tool changer.

Daewoo MYNX 500 hi-speed heavy duty vertical machining center, 20 HP, 8000 RPM spindle w/24 station tool changer.

Daewoo DVC 500 High - Speed heavy duty vertical machining center with integral indexing table, 20 HP, 10,000 RPM spindle, 30 station tool changer.

Daewoo Puma 10 HC turning center, 30 HP spindle w/35-3500 RPM.

Daewoo Puma 240C turning center, 25 HP spindle, 35-3500 RPM.

Bridgeport Series 1 EZ-TRAK CNC vertical milling machine.

CNC Programming
Partmaker Cam/Mill

Partmaker Cam/Turn

Realtrac Shop Floor Manufacturing Software

Inspection Department
PowerGage Arm Inspection Gage is the only portable measurement device that enables manufacturers to verify that a part meets the CAD file's specs to within .0002 of an inch. The power arm is a high tech, yet user-friendly inspection device. As the user traces the arm's tip over the part's entire surface, the system's laptop computer verifies all of the part's 3D measurements against the original CAD file ('the digital blueprint') - to see if it was made correctly and, if not, where it needs to be corrected thus reducing scrap, re-work, and labor costs.

Manual Machining Capabilities
Fortune engine lathe.
21 inch swing over bed
26-3/4 inch swing in gap
11 inch swing over saddle
116 inches - between centers with digital readouts.

Chevalier Model FSG-618M Hand Feed Surface Grinder, 6'' x 18" Table.

Wotan horizontal boring mill, Model B-3 table type. 3" diameter spindle, 27-1/2" max boring depth, 29-1/2" max distance table top to center of spindle, 77" max distance spindle nose to outboard. 31 inch x 39 inch table, 29-1/2" cross movement of table. Table revolves 360 degrees.

Victor Fortune Heavy Duty Lathe S20/20, 16" swing over Bed, 8" swing over saddle, 60" between centers.

Floor type heavy duty geared head drilling & tapping machine.

Boyar Schultz 6"x12" surface grinder w/OD attachments.

Bridgeport Series I vertical milling machine.

Turret MV-54 vertical milling machine.

Milwaukee magnetic drill, #3 morse taper.

Keyway broaches to 1/2 inch wide, including metric sizes.

Misc. Milling machine attachments, dividing heads, rotary tables, right angle heads. Misc. inspection equipment.

Willis - Bergo radial arm drill LP1250, 4' - 0 ARM

Welding & Fabrication Capabilities
Accupress 100 Ton press break 3/16" x 10'-0".

Scotchman FI-5109 Ironworker 51 Ton.

HEM H101-A1 horizontal automatic production cutoff saw.